How To Measure A Mans Shirt Sleeve Lengthep?

KristinNovember 18, 20218min0

How To Measure A Mans Shirt Sleeve Lengthep?

You can measure your sleeve length by measuring from the center back of your neck (at your spine) to the end of your shoulder at the top. To find the ideal place for your shirt cuff to sit, measure from your shoulder to just past your wrist bone. If you are measuring with an elbow, always bend it slightly to make it easier.

What Is The Average Men’s Sleeve Length?

It is not uncommon for men’s sleeves to be 32 to 33 inches long, but don’t assume you are the average. Measure your sleeve length by taking a moment.

How Do You Measure Men’s Dress Sleeves?

The measuring tape should be placed at the center of the back of the neck at one end. Measure to the center of your meaty part by running the tape over your shoulder and letting it hang down. shrinkage should not be adjusted.

How Do You Measure Mens Short Sleeve Length?

A short sleeve’s length can be measured along its top edge. The shirt should be buttoned up fully, facing up. Spread the shirt sleeve out evenly on a firm, flat surface, so that the front and back edges of the opening are straight and aligned.

What Is The Normal Sleeve Length On Men’s Shirts?



Shirt Length

28 3/4″

31 1/2″

Shoulder Width

16 7/8″

20 1/8″

Sleeve Length (normal)

25 1/4″


Sleeve Length (extra Long)

27 1/8″


What Sleeve Length Is 32 33?

Dress shirts are measured by their neck size, and their sleeve length is measured by their second number on the size tag. An example of this would be a shirt marked “15 12 32/33” that has a 15 12 inch neck and a 32 or 33 inch sleeve.

What Sleeve Length Is 34 35?

There is actually a 34/35 sleeve length shirt. 5 inches. The length of this document is approximately 400 words. Generally, mass manufacturers use the combo sleeve lengths to cut down on the number of sizes they need to carry, which is why they wear 34/35 shirts.

How Do I Measure My Sleeve Length?

You should start by taping the tape measure at the nape or neck with the end. After the measure has run over the top of the shoulder (if one is there), it should be down the arm to just below the wrist bone, following a seam line. If you prefer, you can take the measurement from a favorite shirt that you have always worn.

How Long Is A Short Sleeve?

The sleeves should end between the middle and bottom of your bicep when you wear a short sleeve shirt. A more modern style should be a sleeve length that is closer to the middle of your bicep.

What Is Average Male Sleeve Length?



Sleeve Length (normal)

25 1/4″

25 5/8″

Sleeve Length (extra Long)

27 1/8″

27 1/2″


44 7/8″



41 3/4″

44 7/8″

What Is The Length Of Basic Men’s Shirt Sleeve?

Therefore, a shirt size “15 34/35” means that the neck is 15 inches and the sleeve is between 34 and 35 inches wide. Business shirts are usually more tailored-fitting when measured in numeric measurements since they are more specific than alpha sizes, so you can usually get one without needing to change it.

Watch how to measure a mans shirt sleeve lengthep Video

About us

Here at, we move with fashion. With our aim of creating a strong online fashion community full of fashion enthusiasts, we are here with the best and most relevant content for our readers. Learn all about the positive and negative aspects of different products and apparel that are launched globally through us.